Tuckpointing in Brentwood CA - Fresh mortar joints that match your brick
Mortar crumbling out of your brick joints? We replace the bad joints with new mortar that suits the wall and the look you want.
Request an estimate
Does crumbling mortar mean my brick needs tuckpointing?
Tuckpointing in Brentwood, CA means we clear the worn mortar out of the joints between your bricks, fill them with new mortar that closely matches the brick color, then run a thin contrasting line down the middle so the joints look crisp and fine. We do it for homes in Brentwood and the cities around it.
Most folks call after they notice mortar that's crumbling or has gaps, hairline cracks running through the joints, or a crack opening up between a brick and its mortar, and those are the usual signs a wall is due. The price comes down to how tall the wall is, how much of the mortar is damaged, what shape the brick and foundation are in, and how easy the wall is to reach. The schedule mostly turns on how many joints need work and whether any brick has to be fixed first. I'll look at your wall in person, and the written estimate with photos shows you which joints I'd redo and what it comes to.
How we handle tuckpointing, start to finish
First I check whether the trouble is really just in the joints, because tuckpointing only fixes mortar. Loose or cracked bricks, stair-step cracks, leaks or brick faces flaking off mean something else needs fixing first, or the new mortar usually just cracks along the same line again. Next I mark only the joints that are actually bad, since sound original mortar is better than anything we'd put back, and repointing is slow, hands-on work, so leaving good joints alone keeps the job smaller. Then I go over the two finish styles with you, a joint that blends in with the brick or a crisp contrasting line, so the wall ends up looking the way you want. After that our crew clears the old mortar out of the marked joints, packs in the new, shapes each joint to the finish you picked and cleans the wall down.
When the bricks themselves are cracked, loose or spalling, which is the face flaking off, that's brick repair, and we take care of it before any mortar goes in so the cause gets fixed. If you've been eyeing the front of the house too, our crew also lays driveway pavers, and it's easy to look at both while I'm out.
Hiring a crew for tuckpointing in Brentwood
California lets someone without a contractor's license take a small job only when it's under the state's $1,000 limit, needs no permit, and that person has nobody working for them on it. Tuckpointing a wall takes a crew, so when you hire one for your house in Brentwood, you're hiring a licensed contractor. That's worth checking before anyone sets up a ladder, because a handyman with a couple of helpers is already outside what the state allows.
Most of what we tuckpoint around here is brick on chimneys, garden and planter walls, porch steps and front accents, and it's usually a patch of joints rather than a whole wall. We see the same mix on jobs in Oakley and Antioch, and we start every one the same way, by checking the brick before we talk about mortar.
- Call (925) 503-1047
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM
- Brentwood, CA 94513
What happens when you call Allied Brentwood Masonry and Concrete in Brentwood
Call us or send photos
Call (925) 503-1047 or send the form, and add a few photos of the joints if you have them. We get back to you and set a time for me to come out.
I walk the wall with you
I come out myself, look the brick and mortar over with you and point out what I'm seeing. You get a written estimate with photos that shows which joints need work and what the job costs.
Our crew does the work
If you go ahead, we take care of any permits the job needs and our own crew does the tuckpointing. I set the layout and check the joints as the work goes, so the finish stays the one you picked.
We walk it together
When the last joint is done, we walk the wall together. I'll show you what good joints look like so you know what to watch for in the years ahead.
Why Brentwood homeowners call us about their mortar
The owner looks at every wall
I come out to every job myself, write the estimate and stay on site to set the layout and check the work. You're talking with the person who answers for your wall, not someone passing along notes.
Licensed crew, fully insured
We're licensed and fully insured, which is what California expects of anyone bringing a crew to your house. Our own crew does the work, so you deal with one covered business from the first visit to the last joint.
Repair work since 2021
We've been in business since 2021, and careful repair, mortar and chimneys especially, is what we're known for. I learned under older masons for years, and that's where I picked up the habit of fixing the cause and not just the crack.
Every job comes with our word, satisfaction guaranteed. Request your estimate or call (925) 503-1047, and I'll come look at the joints with you.
Request an estimateGet a written tuckpointing estimate with photos
We respond within 1 business day to set up a visit, and I come out myself to look over the joints and the brick with you. Free quotes on site, written up with photos, with no pressure and no obligation.
- Licensed and fully insured.
- Phone
- (925) 503-1047
- Location
- Brentwood, CA 94513
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM
Questions about tuckpointing in Brentwood
Is tuckpointing the same as repointing?
Not quite, though both replace worn mortar. Repointing uses fresh mortar that matches the old mortar color and stops there, while tuckpointing uses mortar matched to the brick and adds a thin contrasting line for sharp-looking joints. We do both, and I'll show you how each would look on your wall.
How much does tuckpointing cost in Brentwood, CA?
Tuckpointing brick across the US usually costs about $5 to $25 per square foot, and that's the general market range, not our price. Height and the amount of damaged mortar push a wall toward one end or the other, and our written estimate gives you the number for your own wall.
How long does new mortar last on a brick house?
Mortar joints typically last more than 25 years, while the bricks themselves may well last more than 100. So the mortar wearing out first is normal, and repointing is part of the regular upkeep on a brick home, not a sign something failed.
What should I ask a contractor before they tuckpoint my brick?
Ask how they'll match the new mortar to the old, because brick industry guidance says new mortar should be about as strong as the old or weaker so it doesn't do lasting damage to the brick. The same guidance notes a good bricklayer isn't always skilled at repointing, so ask to see past repointing jobs or a small sample on a hidden part of the wall. Ask us the same questions.
What is the best way to remove old mortar without damaging the brick?
Hand tools are the gentlest way, and crews usually use them on small areas and a grinder or power saw on large ones. Power tools are faster, but they can chip the brick edges along the joints, so I'll tell you how we plan to clear your joints before we start.
Why is there white powder on my brick after tuckpointing?
That white haze is efflorescence, and it occasionally shows up in the first few months after repointing. It usually goes away on its own with normal weathering, so give it some time before you worry about it.
Other work that goes with mortar repair
Brick repair
If bricks are loose, cracked or flaking at the face, fixing them comes first, since fresh mortar around a failing brick won't hold up for long.
Driveway pavers
Pavers can tie a new driveway in with the brick on your house, and it's easy to talk one through while I'm already out looking at your walls.
Send us photos of your mortar joints
A few pictures plus a rough height and length for the wall let me show up already knowing what to look for, so the visit gets right to your answer.
Request an estimateCall (925) 503-1047